Program Printing

Printing has been designed to give you the greatest amount of control over what you print. All options are not available to all print

Jobs, If an option will not be available the item  will be greyed out signaling that it can not be selected or changed.

In some cases if a print job isn't available for the printout, that tab will not be visible.

In some case the printout really doesn't require any additional formatting. In this case you will see a print dialog window to select

the printer to print to. The printout will then spool cronym for simultaneous peripheral operations on-line, spooling refers to putting jobs in a buffer, a special area in memory or on a disk where a device can access them when it is ready. Spooling is useful because devices access data at different rates. The buffer provides a waiting station where data can rest while the slower device catches up. The most common spooling application is print spooling. In print spooling, documents are loaded into a buffer (usually an area on a disk), and then the printer pulls them off the buffer at its own rate. Because the documents are in a buffer where they can be accessed by the printer, you can perform other operations on the computer while the printing takes place in the background. Spooling also lets you place a number of print jobs on a queue instead of waiting for each one to finish before specifying the next one. directly to the printer que print queue A reserved area of memory or disk that holds output designated for the printer until the printer can receive it for printing.

The Title, Header and Footer are pre populated from the Current Active Window. In most cases you can change these values to whatever you like.

In some cases one of these values may be locked for printing the program information on the printout to announce the program used for the

printout. You can adjust the color of these values by clicking the Colored Box at the end of the text inputs.

The sample area will show the selected fonts setting for each of the inputs as you change them.

*When printing from the Reloaders Log each load will print as a separate job. To look over a particular load click the RichText Document

tab and select the load to preview. If you would like to modify the title or footer before each printout check the box Separate Titles.

The total print job is displayed by default so you can view all the printouts at once.

*If you have a selected region in the main window only those values will be selected to graph.

*If you have the Coriolis Effect Window visible the data printed will be selected to [Calculations Print as Table (CED)] You can change this to print

the standard calculation data by clicking the [Calculations Print as Table Button].

When the Print Window first starts the program will place you in the Title input box.

Settings:

Choose the Text and  Fonts for the Title, Header and Footer in the Document settings frame.

What To Print:

Print Plain Text Option.

Select this option to print  the load data and the calculation results in a very basics text format.

Located on the Plain text tab.

You may also select to add any of the options under Other options to the Plain Text printout from the Document Settings Tab.

Check the Include Graph Box if you would also like to print the default graph of all main window results.

Print Formatted RichText The Rich Text Format (often abbreviated RTF) is a proprietary document file format with published specification developed by Microsoft Corporation since 1987 for Microsoft products and for cross-platform document interchange. Document:

Select this option to print the Document with Load Data, Calculation Results and the Graph located on the RichText Document Tab.

when this option is selected only print page numbers is available under Other Options.

Selecting Print Graph Only prints only the Graph (Graph Image Tab)  in Landscape mode No Document Settings are available.

The graph loads centered in the window. You can scroll up-down and left-right to view the complete graph.

Print Calculation Results will print The calculation results only in the selected format.

Select the format desired for the Data printout.

Clicking Print with either Table format selected will launch the Print options for the tables.

Select the print format desired on each tab and click print.

Print on all pages will print the Title to all pages

Center Justify will locate the title centered on the page.

Grid Settings

Print Grid Lines will print the table as shown in the picture with the values separated with lines.

Print Background Colors will print the grid as shown with alternating colors.

Shade Column Headings will add a light background color as shown to the column headers.

Numbering Options:

Omit page numbers No page numbers will be printed.

Number pages after first will begin printing page numbers on page 2.

Number all pages will begin printing page numbers on page 1.

Location sets the location of the page numbers.

Format as Page n of n will print as Page 1 of 3 (last page count).

Page numbers to margin areas will print the page numbers in the top margin or bottom margin areas.

Print Program Default will print a High Quality Load Data Sheet with a Color Copy of the Results Table Seen above

and a High Quality Landscape Printout of the current graph.

*The Data Printout Window will not be shown with this option selected. The Printout is automatically set by the program to the

values seen above.

You can select the Title and other Documents settings with this printout.